AI Weighing Scale Motherboard, WF-P7602, AndroidSBC, Edinburgh

TL;DR: AI Weighing Scale Motherboard

AndroidSBC field desk: POS rollout map updated across supermarkets, restaurants, hotels and fuel forecourts serving Edinburgh, United Kingdom. The WF-P7602 POS Android motherboard spans the triple-screen POS terminal with independent content and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, HDMI plus LVDS plus eDP triple independent output, and Android 14 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Edinburgh and United Kingdom importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-model WF-P POS Android motherboard family at the Longgang source factory in Shenzhen. The line spans entry single-screen counters through AI face payment terminals and industrial outdoor payment cabinets, so aan Edinburgh integrator can qualify one board family and then move between tiers without re-writing the peripheral layer or re-cutting the enclosure. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so aan Edinburgh partner can trace a single board back to its run.

WF-P7602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For United Kingdom importers sourcing the WF-P family, the WF-P7602-A variant is the typical configuration for the hypermarket checkout plus promotion wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for United Kingdom Buyers

The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a United Kingdom summer, and boards that pass a bench test at 25C start throttling behind a shop window.

The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Edinburgh is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. For the Edinburgh programme the milestone landed on September 23, 2026: 156400 boards shipped on the Felixstowe - Shanghai lane, seven-year firmware window committed on the whole WF-P family.

Competitive Comparison: WF-P7602 vs Competing POS Android Boards

What follows is not a spec-sheet comparison. It is the four questions aan Edinburgh chain asks after its first failed rollout.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the triple-screen POS terminal with independent content has to hold a watchdog, an RTC and a clean auto-recovery path.

• Entry counter tier: WF-P7602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

For Edinburgh partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a BOM across a three-year refresh.

Partner Success Story: Gulf Counter Ventures (restaurant and hotel POS integrator)

The Gulf Counter Ventures rollout in the GCC hospitality segment shows how the WF-P family from AndroidSBC supports Edinburgh integrators. Gulf Counter Ventures installed 156400 WF-P boards across 52 restaurant and hotel counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Counter Ventures branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus UKCA / Ofcom conformity, all bundled into the Shenzhen source-factory shipment.

According to Gulf Counter Ventures Programme Lead for GCC Hospitality: Gulf Counter Ventures runs Arabic and English receipt templates from the same WF-P board, and 156400 units were accepted into the Edinburgh hospitality group after a two-week pilot.

Field Report: triple-screen checkout and promotion wall at a hypermarket

NANSHAN, September 23, 2026 - Man Qing, AndroidSBC field desk. Each WF-P7602 board in the United Kingdom lot carries a serial number logged against its test record, and the peripheral validation report references those serials. The WF-P7602 POS Android motherboard order for Edinburgh, United Kingdom cleared the burn-in station on schedule and is en route via the Felixstowe - Shanghai lane.

The WF-P7602 triple-screen POS terminal with independent content production lot includes the WF-P7602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For United Kingdom integrators, the UKCA marking with the Ofcom radio interface registration paperwork is bundled.

Filed by Man Qing, AndroidSBC field desk, NANSHAN. UK hospitality operators ask for UKCA paperwork and check that the contactless reader handles the higher UK contactless ceiling without a firmware fork.

WF-P7602 Application Scenarios

The WF-P7602 triple-screen POS terminal with independent content sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7602-A configuration is the typical build for the hypermarket checkout plus promotion wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P7602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Edinburgh.
• Convenience and small format stores: the WF-P3566 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3288 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3399 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P1330 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Edinburgh: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Edinburgh Buyers

Because the WF-P family is built at the Longgang source factory, all three tracks below come with the same frozen BOM and the same seven-year firmware window.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and United Kingdom partners usually convert within one quarter.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a triple-screen POS terminal with independent content?

Answer: Yes. AndroidSBC validates triple-screen POS terminal with independent content on the bench with the actual peripherals the Edinburgh partner intends to use, and the result is written into the shipment file.

Which silicon tiers are available in the WF-P family for United Kingdom buyers?

Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Edinburgh partner always knows which tier is shipping.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Edinburgh partner printer and scanner models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for United Kingdom?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.

How are firmware updates delivered to a United Kingdom estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for United Kingdom orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Edinburgh partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in United Kingdom?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Edinburgh programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P7602 Sourcing Conversation

Edinburgh integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to United Kingdom buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.